1. HOME
  2. HOME
  3. Product
  4. Outward-folding flush door

Outward-folding flush door

WDR40 Convenient door that contributes to space saving

Large-sized swing door has a large rolling radius that may cause a hindrance when the door is opened. In the case of doors with relatively high opening/closing frequency, particularly those of rooms that face aisles where objects and people frequently pass by, dead spaces are created every time when doors are opened and closed, resulting in ineffective space utilization. Such worries can be solved by this outward-folding flush door, WDR40. Only half the size of the door is used when the door is opened or closed. For example, about four times larger space can be used effectively when compared with a regular double swing door of the same size. Two doors can be fixed when they are opened. Doors can be compactly stored by the use of handle pockets also on the wall side*1. Installation of reinforcement, such as furring iron frame, is recommended when the door is installed in a heat-insulating panel system. For more information, please consult our sales representative.

* 1Handle pocket may not be required when installing on a furring iron frame.

  • Excellent airtight performance as it is designed on the basis of DR40 that meets the A-4 grade airtight performance (for four-side frame cremone specification) *
  • Handle pockets and attached door stoppers prevent the doors from bumping each other and locks from hitting the wall (handle pocket on the wall side is optional)
  • The newly-developed slide drop securely keeps the slave door closed even if the floor is uneven
  • Very light weight due to the combination of aluminum frames, honeycomb materials, and styrene foam (phenol foam in case of heat-insulating incombustible specification) inside the door
  • Various options are available, such as window and louver
  • Fully custom-fabricated in the unit of one millimeter

* Airtightness test for WDR40 as a single unit is not performed.

WDR40 / Single swing / three-side frame

WDR40 / Double swing / four-side frame

Scope of fabrication (unit = mm)

※You can flick left and right to view.
External frame dimension WDR40
Single swing F0 series W1300 - 2080
H1890 - 3057 *1
Aspect ratio must be (DH/DW) >= 1.45 *2
Cremone series W1300 - 2080 *1
H1890 - 5080
Aspect ratio must be (DH/DW) >= 1.45 *2
Double swing F0 series W2540 - 4080
H1890 - 3057 *1
Aspect ratio must be (DH/DW) >= 1.45 *2
Cremone series W2540 - 4080 *2
H1890 - 5080
Aspect ratio must be (DH/DW) >= 1.45 *2

*1 When H exceeds 3000mm, install reinforcement such as furring iron frame.(Only three-side frame) In the case that there is no pressure difference between inside and outside of the room. If pressure difference exists, up to H2500mm in effective dimension is available.

*2 When DW is greater than 2000mm,aspect ratio must be over (DH/DW) >= 1.6

Specification

※You can flick left and right to view.
Model WDR40
Door thickness
(Overall thickness)
41mm (47mm)
Opening form Single swing, Double swing
Outer frame Aluminum profile (Alumite, clear finish)
Framing Aluminum framing
Face material Metal sheet 0.4 - 0.6mm
(Steel, aluminum, stainless, or supplied material)
Core material Styrene foam
Paper honeycomb
Phenol foam
Ceramic honeycomb
Packing EPDM rubber
Hinge Stainless flag-type hinge
Sliding rubber Polyester base fabric painted with fluorine resin
Lock system F0 series
Round knob: HMW MAW (MIWA LOCK)/UC-Q,AS-Q(GOAL)
Lever lock: LA52 (MIWA LOCK)/LG-NU(GOAL)
Case lock: MACC HMCC (MIWA LOCK)/UCC,ASC(GOAL)
Cremone series
53 series, H83V (Shibutani)
Window *1 FX40(Single) , FW40(Multiple layer)
Louver *1 GA40

*1 Window and louver can be added optionally.