1. HOME
  2. HOME
  3. Product
  4. Detachable heat-insulating machine hatch

Detachable heat-insulating machine hatch

TIH40 Resin-made heat-insulating machine hatch for low-temperature cleanrooms

In a cleanroom with a decreased temperature, use of aluminum frame material must be minimized to the utmost extent from the viewpoint of condensation prevention, when an opening is required for carrying in/out equipment. TIH40 uses synthetic resin for all the frame materials to minimize condensation phenomenon caused by heat conduction on panels and outer frames. The smart-looking external appearance is almost same as aluminum detachable machine hatch.

  • Almost the same smart-looking appearance as aluminum machine hatch, while having heat-insulating property.
  • Very light weigh due to the combination of resin frame and styrene foam.
  • It can support some chemicals that cannot be supported with metal-made machine hatch.
  • Various options are available, such as FIX window that is exclusively for double glass.
  • Fully custom-fabricated in the unit of one millimeter.

TIH40 / Three-side frame

TIH40 / Four-side frame

Scope of fabrication (unit = mm)

※You can flick left and right to view.
Frame opening dimension TIH40
W400 - *1
H400 - 4080

*1 Frame material is divided if the dimension exceeds 4200mm.

Specification

※You can flick left and right to view.
Model TIH40
Door thickness
(Overall thickness)
41mm (47mm)
Configuration One piece, Two piece, Three piece, Four piece, etc.
Outer frame ABS resin (silver color)
Face material Metal sheet 0.4 - 0.6mm
(Steel, aluminum, stainless, or supplied material)
Core material Styrene foam
Shut-in fitting Cam latch shut-in handle (zinc die-cast)
Hinge Stainless flag-type hinge
Handle Exposed handle (stainless SUS304)
Packing Elastomer
Window *1 PX40(Single) *Japanese site,
PW40(exclusively for double-glazed)

*1 Window can be added optionally.