1. HOME
  2. HOME
  3. Product
  4. Sliding door plus swing door

Sliding door plus swing door

SPD40 A new form in pursuit of usability. Combination of sliding door with flush door

This is a new form of door that combines sliding door with flush door. Under normal circumstances, it is used as a sliding door for the entrance and exit of people. The door can be opened when carrying in or out large equipment or furnishings, providing a required opening for carrying in or out. The sliding door is available with three types of open/close mechanisms: manual, self-closing, and automatic. The flush door is fixed with a French drop when it is closed.

  • Very light weight due to the combination of aluminum frame and styrene foam (phenol foam in case of incombustible specification) or honeycomb material inside the door.
  • Insertion of foundation into the panel is not required for the installation of the opening frame and rail on the sliding door portion.
  • Simple installation - the outer frame of flush door portion only required to be fixed on the supplied foundation plate.
  • The bellows rubber around the opening frame or for upper portion closure is equipped with adjusting function that allows adjusting after installation.
  • Standard specification does not leave remaining gap, enabling effective utilization of limited space.
  • Various options are available, such as window and louver.
  • Fully custom-fabricated in the unit of one millimeter.

SPD40

Scope of fabrication (unit = mm)

※You can flick left and right to view.
  Overall Sliding door portion
(master side)
Swing door
(slave side)
Manual W1040 - 4100
H600 - 3500
Ws530 - 2500
Hs650 - 3550
Wd420 - 1800
Hd596 -3496
The aspect ratio Ws:Hs of sliding door portion is up to 1:5. Please use a floor mount stopper in case of exceeding 1:3.
The aspect ratio Wd:Hd of swing door portion is up to 2:3.
Air cushion cannot be attached when the sliding door portion is less than 620.
Rail cannot be divided within the range of sliding door portion.
Self-closing W1100 - 3600
H600 - 3500
Ws680 - 2000
Hs650 - 3550
Wd420 - 1800
Hd596 -3496
The aspect ratio Ws:Hs of sliding door portion is up to 1:5. Please use a floor mount stopper in case of exceeding 1:3.
The aspect ratio Wd:Hd of swing door portion is up to 2:3.
Rail cannot be divided within the range of sliding door portion.
Automatic W1050 - 4100
H600 - 3500
Ws630 - 2500
Hs650 - 3550
Wd420 - 1800
Hd596 -3496
The aspect ratio Ws:Hs of sliding door portion is up to 1:5. Please use a floor mount stopper in case of exceeding 1:3.
The aspect ratio Wd:Hd of swing door portion is up to 2:3.
Please ask our sales representative about manufacturers of automatic door engines to be used.
Rail cannot be divided within the range of sliding door portion.

* W and H = Frame opening dimension.

Specification

※You can flick left and right to view.
Model Sliding door portion
(Master side)
Swing door
(Slave side)
Door thickness
(Overall thickness)
41mm (47mm)
Opening form Manual, Self-closing, Automatic (always opens first) Manual (always opens after the sliding door)
Opening frame, Outer frame, Door frame Aluminum framework (alumite, clear finish)
Framework Aluminum framework
Face material Metal sheet 0.4 - 0.6mm
(Steel, aluminum, stainless, or supplied material)
Core material Styrene foam
Paper honeycomb
Phenol foam
Ceramic honeycomb
Catch
/
Handle
Front side: Exposed handle (stainless)
Back side: Flush-type square catch (stainless)
Basic setting
Without handle *1
Option
F0 specification: Dummy handle (lever handle, round knob)
Cremone specification: Cremone handle (top: rod bar, bottom: French drop)
Guide block L-shape mooting stay: Stainless
Guide block: Super-high-molecular polyethylene
-
Bellows rubber
(Sliding door portion)
Polyester base fabric painted with fluorine resin -
Packing
(Swing door portion)
- F0 series
EPDM rubber
Cremone series
Elastomer
Sliding rubber
(common)
Polyester base fabric painted with fluorine resin
Door end packing Elastomer -
Hinge - Stainless flag-type hinge
Window *2 FX40(Single) , FW40(Multiple layer)
Louver *2 GA40
Lock system *2 Miwa Lock UD lock (with remaining gap) *3

*1 Swing door portion is fixed with a French drop. Handle is not installed in the standard setting.

*2 Window, louver, and lock system can be added optionally.

*3 In principle, automatic does not support 'lock system'.