1. HOME
  2. HOME
  3. Product
  4. Sliding framed door

Sliding framed door

SK40 Light-weight aluminum framed door that supports large-sized doors

This is an aluminum framed sliding door exclusively for large-sized doors for carrying in/out large equipment. Full-face see-through is available for achieving large-sized doors with the largest-ever window. The floor surface of three-side frame specification does not have any protruding objects such as rails, allowing smooth entrance and exit of forklifts and carts. This door enables you to achieve smart-looking large-sized doors with a wide variety of functionalities.

  • This door achieves astonishingly large dimension of H5000mm in effective dimension, while maintaining smart-looking appearance that is unique to framed doors (manual and automatic only).
  • Free selections from among with or without center frame, combinations of face plates and louvers.
  • Convenient when large-sized window and/or louver is desired, such as full-face window and full-face louver.
  • Simple installation as insertion of foundation into panel is not required when attaching opening frame and rails.
  • The bellows rubber around the opening is equipped with adjusting function that allows adjustment after.
  • Standard specification enables effective space utilization as it does not leave remaining gap.
  • Fully custom-fabricated in the unit of one millimeter.

SK40 / Single sliding

SK40 / Double sliding

SK30 Smart-looking, light-weight aluminum framed door

This is a man-door-sized narrow-framed aluminum door. Appearance is very smart as the vertical and horizontal frames are assembled with 45 degree diagonal stops. Three types of open/close mechanisms are available: manual, self-closing, and automatic. It allows free customization depending on usages and preferences, such as full-face glass, full-face louver, or dividing between the upper and lower portion by adding a center frame.

  • Convenient when large-sized window and/or louver is desired, such as full-face window and full-face louver.
  • Very light weight due to the combination of only aluminum frames and face plates.
  • Streamlined appearance due to small perspective dimension and parting dimension of the frame.
  • Free selections from among with or without center frame, combinations of face plates and louvers.
  • Simple installation as insertion of foundation into panel is not required when attaching opening frame and rails.
  • The bellows rubber around the opening is equipped with adjusting function that allows adjustment after installation.
  • Standard specification enables effective space utilization as it does not leave remaining gap.
  • Fully custom-fabricated in the unit of one millimeter.

SK30 / Single sliding

SK30 / Double sliding

Scope of fabrication (unit = mm)

※You can flick left and right to view.
Frame opening dimension *1 SK30 SK40
Manual Single sliding W500 - 1200
H320 - 2500		 W800 - 2500
H1400 - 5000
Aspect ratio W:H is up to 1:5. (Please use a floor-mount stopper in case of exceeding 1:3)
Air cushion cannot be attached to doors of less than W600.
Please understand that, if the rail is divided, wobbling is generated when suspension pulleys are running on the joint section.
Double sliding W1000 - 2400
H320 - 2500		 W1600 - 5000
H1400 - 5000
Aspect ratio W:H is up to 1:2.5. (Please use a floor-mount stopper in of exceeding 1:1.5)
Air cushion cannot be attached to doors of less than W1280.
Sanitary cover (slanted cover) is not supported if dimension W exceeds 4000.
Self-closing *1 Single sliding W500 - 1200 *1
H320 - 2500 *1		 W800 - 2000 *1
H1400 - 5000 *1
Aspect ratio W:H is up to 1:5. (Please use a floor-mount stopper in case of exceeding 1:3)
Delivery with the rail divided is not available.
Some sizes may not be supported even in the case of manufacturable dimension, depending on the use environment and/or door weight.
Double sliding W1000 - 2400 *1
H320 - 2500 *1		 W1600 - 4000 *1
H1400 - 5000 *1
Aspect ratio W:H is up to 1:2.5. (Please use a floor-mount stopper in case of exceeding 1:1.5)
elivery with the rail divided is not available in case of interlocking specification. Only non-interlocking specification is available.
Some sizes may not be supported even in the case of manufacturable dimension, depending on the use environment and/or door weight.
Automatic Single sliding W600 - 1200
H320 - 2500		 W800 - 2850
H1400 - 5000
Aspect ratio is up to W:H = 1:4.
Double sliding W1100 - 2400
H320 - 2500		 W1600 - 5000
H1400 - 5000
Aspect ratio is up to W:H = 1:2.

*1 Effective dimension

Specification

※You can flick left and right to view.
Model SK30 SK40
Door thickness
(Overall thickness)		 36mm 47mm
Opening form Manual, Self-closing, Automatic
Outer frame Aluminum framework (Alumite, clear finish)
Assembling method Thrust-in structure
Face material Opaque: Laminated aluminum plate
Transparent: Glass, Polycarbonate, Acrylic, Polyvinyl chloride, PET, etc.
Catch Front side: Exposed handle (stainless SUS304)
Back side: Hook (stainless SUS304) Back side: Flush-type square catch (stainless SUS304)
Guide block Mounting stay: Stainless
Guide block: Super-high-molecular polyethylene
Sliding rubber
Bellows rubber		 Polyester base fabric painted with fluorine resin
Door end safety rubber - Elastomer
Louver *1 Wing configuration: Angular / One-side sloping
Aperture ratio: 30% / 50%
Lock system *1 Please consult with us Miwa Lock UD lock *2
(with remaining closing gap)

*1 Louver and lock system can be added optionally.

*2 In principle, 'Automatic' does not support 'lock system'.