1. HOME
  2. HOME
  3. Product
  4. Resin frame FIX window

Resin frame FIX window

PW FIX window exclusively for insulation glass, using resin frame that offers superior heat-insulating property

All-resin insulation-glass FIX window. The spacers for the insulation glass used are also resin-made, so as to enhance the heat-insulating property. PW 40 is for panel thicknesses of 40 to 44 mm, and PW50 is for 50mm. The insulation glass to be used can be specified according to intended use, from regular 2-piece pair glass, multiple glass using three or four pieces of glass, and heat-generating insulation glass with heater, etc.

  • One-Made of resin with low thermal conductivity to prevent condensation on the frame. *
  • Foundation around the opening is not required, as it is fixed by pulling in the window frame with each other.
  • On-site glass work is not required, as the face plate is factory-fixed before delivery.
  • Supports application of various films as an option.
  • Fully custom-fabricated in the unit of one millimeter.

* Condensation may occur depending on the condition.

PW

Scope of fabrication (unit = mm)

※You can flick left and right to view.
Model PW40, PW50
Effective dimension W172*1 - 2000
H172*1 - 2000
Up to 3 square meter in effective area

*1 Accuracy of the stop may be lower in the frame outer dimension is less than 350mm.

Specification

※You can flick left and right to view.
Model PW40 PW50
Frame ABS resin framework (silver color)
Frame configuration One-side flat, One-side stepped
Supported panel thickness 40mm - 44mm 50mm
Face plate thickness 19mm - 46mm
Face plate fixing method Silicone caulking
Fixing method on panel Sub body is fixed with screws (foundation not required)