1. HOME
  2. HOME
  3. Product
  4. Aluminum frame insulation-glass FIX window

Aluminum frame insulation-glass FIX window

FW Insulation glass version of model FX FIX window

The configuration is almost the same as model FX FIX window. It can accommodate insulation glass or face plate with a thickness of 8 mm or more. Glass work is not required, same as FX.

  • Both sides of the frame are tapered to satisfy HACCP.
  • Foundation around the opening is not required, as it is fixed by pulling in the window frame with each other.
  • On-site glass work is not required, as the face plate is factory-fixed before delivery.
  • Supports application of various films as an option.
  • Fully custom-fabricated in the unit of one millimeter.

*Please pay attention to condensation, as edge cutting is not applied on the frame.

FW

Scope of fabrication (unit = mm)

※You can flick left and right to view.
Model FW30,FW40,FW42,FW44
Effective dimension W183*1 - 2000
H183*1 - 2000
Up to 3 square meter in effective area

*1 Accuracy of the stop may be lower in the frame outer dimension is less than 350mm.

Specification

※You can flick left and right to view.
>Model FW30 FW40 FW42 FW44
Frame Aluminum framework (alumite, clear finish)
Frame configuration Tapered on both sides
Supported panel thickness 30mm 40mm 42mm 44mm
Face plate thickness 8mm - 16mm
Face plate fixing method Silicone caulking
Fixing method on panel Sub body is fixed using screws (foundation not required)