print <<"EOE";
Aluminum framed door especially for large-sized doors for carrying in/out large equipment. The use of longer vertical frames allows attaching cremone mechanism and electric lock, resulting in achieving large size frame doors. It can also be used when accommodating large windows on large-sized doors.
DK40 / Single swing / three-side frame
DK40 / Double swing / four-side frame
Light-weight framed door for inspection opening or exit/entrance door, for the size of so-called �gman door.�h Available models are DK30 that uses latch-type lock and DK34 that allows incorporating electric lock by means of a dedicated outer frame. Can be selected from two types: with center sash bar that separates upper and lower face plates, and without center sash bar for separation.
DK30 / Single swing / three-side frame
DK30 / Double swing / four-side frame
DK30 / Inspection opening
DK34 / Single swing / three-side frame
External frame dimension | DK30 | DK34 | DK40 | |
---|---|---|---|---|
Small door and Inspection opening |
Cam latch |
W300 - 1400 H370 - 1400 |
- | - |
When W is greater than H, the largest dimension of W is up to 900mm in usable dimension. Aspect ratio is up to H:W = 1:1.75 |
||||
F0 series |
W400 - 1400 H370 - 1400 |
W400 - 1410 H550 - 1400 |
- | |
When W is greater than H, the largest dimension of W is up to 900mm in usable dimension Aspect ratio is up to H:W = 1:1.5 |
||||
Single swing | F0 series |
W400 - 1410 H400 - 3060*1 |
W400 - 1410*2 H550 - 3060*1 *3 |
W800 - 2080 H800 - 3080*1 |
Dimension DW cannot exceed the dimension DH | ||||
Cremone series | - | - |
W800 - 2080*2 H800 - 5080 |
|
Dimension DW cannot exceed the dimension DH | ||||
Double swing | F0 series |
W800 - 2760 H420 - 3060*1 |
W800 - 2760 H550 - 3060*1 |
W1600 - 4080*2 H800 - 3080*1 |
Dimension DW cannot exceed the dimension DH | ||||
Cremone series | - | - |
W1600 - 4080*2 H800 - 5080 |
|
Dimension DW cannot exceed the dimension DH |
Model | DK30 | DK34 | DK40 |
---|---|---|---|
Door thickness (Overall thickness) |
36mm | 47mm | |
Opening form | Small door (only for DK30), Single swing, Master-slave opening, Double swing | ||
Outer frame | Aluminum profile (Alumite, clear finish) | ||
Framing | Piece-to-piece assembling with stop cutting*5 | ||
Face material |
Opaque: Aluminum laminated plate Transparent: Glass (DK30 - reinforced glass only), Polycarbonate, Acrylic, Polyvinyl chloride, PET, etc. |
||
Packing | EPDM rubber | ||
Hinge | Stainless flag-type hinge*1 | ||
Sliding rubber | Polyester base fabric painted with fluorine resin | ||
Lock system*3 | Inspection opening*2 | ||
One-side handle: Zinc die-cast cam latch handle | |||
F0 series | |||
Round knob: HMW MAW*6 (MIWA LOCK) / UC-Q,AS-Q*6 (GOAL) | |||
Lever lock: LA52 (MIWA LOCK) / LG-NU(GOAL) | |||
Case lock: MACC*6 HMCC (MIWA LOCK) / UCC,ASC*6 (GOAL) | |||
- | Round knob electric lock: AUR(T)W (MIWA LOCK) / EUR(T)-Q(GOAL)*7 | ||
- | Lever electric lock: AUR(T)52 (MIWA LOCK) / EUR(T)-NU(GOAL)*7 | ||
- | Cremone series | ||
- | 53 series, H83V (Shibutani) | ||
- | Electric lock EE55, H83V (Shibutani) | ||
Door closer*4 | Ryobi,NewStar | ||
Louver*4 |
Wing configuration: Angular / One-side sloping Aperture ratio: 30% / 50% |
Copyright (C) 2001-2024 SUNWIZZ CO.,LTD. All Rights Reserved.